📍 Riyadh, Riyadh Province
Non-Destructive Testing (NDT): MPI, DPI & UT in Riyadh
Non-destructive testing finds cracks, wall loss and weld flaws without cutting or damaging the item. EES applies magnetic particle (MPI), dye penetrant (DPI), ultrasonic (UT) and visual methods to lifting equipment, structures, welds and pressure parts, and helps you choose the method that suits the material and the defect you are looking for. The capital drives Vision 2030 with giga-projects, metro, urban developments and a vast contractor base.
NDT Testing (MPI, DPI, UT) in Riyadh: local context
Steel erection and heavy lifting in Riyadh typically call for load tests on cranes and proof load tests on lifting beams before the main lifts begin, while welded structures and pressure piping fabricated in workshops in 2nd Industrial City Riyadh often need NDT before they ship to site. Summer heat affects when outdoor loading and surface preparation can be done safely, so EES can schedule that work for cooler hours and hand over documented test records and NDT reports.
What we deliver in Riyadh
- ✓Method selection by material, defect type and access: MPI for surface and near-surface cracks in ferromagnetic steel, DPI for surface-breaking defects in any non-porous material, UT for internal flaws and remaining thickness
- ✓Magnetic particle testing of hooks, shackles, pins, lifting lugs, pad-eyes and load-bearing welds on cranes and lifting beams
- ✓Dye penetrant testing of welds and surfaces on stainless steel, aluminium and other non-magnetic materials, and of weld repairs after grinding
- ✓Ultrasonic weld testing, plate and forging checks and thickness gauging on structures, tanks, vessels and pipework
- ✓Visual testing (VT) of welds and surfaces as the first step before any other method, covering weld profile, undercut, spatter and surface condition
- ✓NDT before and after proof load tests on lifting points, and as part of periodic crane and lifting-equipment inspection when the client scheme calls for it
- ✓Written procedure, acceptance criteria and the technician qualification scheme and level agreed with you before work starts
Standards
- ✓ASME BPVC Section V (Nondestructive Examination)
- ✓ISO 9934 (MT), ISO 3452 (PT) and ISO 17640 (UT of welds)
- ✓ISO 9712 and ASNT SNT-TC-1A (NDT personnel qualification schemes)
- ✓Client NDT procedures and acceptance criteria
Documentation
- ✓NDT report for each method used (MT, PT, UT, VT) stating technique, equipment and results
- ✓Indication sketches and photographs with location, length and orientation
- ✓Accept or reject statement against the specified criteria
- ✓Equipment and consumable traceability records, with re-test report after repair
Who we support in Riyadh
Local focus areas: Sudair City, 2nd Industrial City Riyadh, King Salman Park.
Vision 2030 Mega-Projects
Equipment certification and operator training for NEOM, Qiddiya, Red Sea Global, Diriyah and other giga-projects.
Learn more →Construction & Infrastructure
Fleet inspection, crane certification and worker safety training for construction and infrastructure projects.
Learn more →Power & Utilities
Equipment certification and safety training for power plants, grids and water utilities.
Learn more →Manufacturing & Industrial
Overhead crane, hoist and forklift certification for factories and industrial cities.
Learn more →Also available in Riyadh
Magnetic Particle Testing (MPI / MT)
Magnetic particle testing for surface and near-surface cracks in hooks, shackles, welds and crane components made of ferromagnetic steel.
Learn more →Dye Penetrant Testing (DPI / PT)
Dye penetrant testing to find surface-breaking cracks and porosity in welds and non-magnetic materials such as stainless steel and aluminium.
Learn more →Ultrasonic Testing (UT) & Thickness Gauging
Ultrasonic flaw detection, weld UT and thickness gauging for structures, tanks, pipework and lifting equipment, to a written technique.
Learn more →Crane Proof Load Testing (Water Bag, Dead-Weight & Pull-Out)
Water-bag, dead-weight and pull-out proof load tests for cranes, davits, lifting beams, pad-eyes and anchors, with the applied load measured and recorded.
Learn more →Forklift Operator Training & Certification
Classroom and practical forklift operator course with a written test, driving assessment and competency card for warehouses, ports and plants in KSA.
Learn more →Mobile Crane Operator Training & Certification
Mobile crane operator course covering load charts, outrigger set-up, signals, LMI, daily checks and a practical lift test for Saudi sites.
Learn more →Also serving: NDT Testing (MPI, DPI, UT) in Al Ahsa, NDT Testing (MPI, DPI, UT) in Dhahran, NDT Testing (MPI, DPI, UT) in Al Khobar, NDT Testing (MPI, DPI, UT) in Jubail
FAQs
Do you provide NDT Testing (MPI, DPI, UT) in Riyadh?＋
Yes. EES provides NDT Testing (MPI, DPI, UT) at client sites in Riyadh, including Sudair City, 2nd Industrial City Riyadh and King Salman Park. Contact us with your requirement and we will confirm scope and scheduling.
Which standards and documents apply to NDT Testing (MPI, DPI, UT) in Riyadh?＋
Work in Riyadh is aligned with the following standards and references: ASME BPVC Section V (Nondestructive Examination); ISO 9934 (MT), ISO 3452 (PT) and ISO 17640 (UT of welds); ISO 9712 and ASNT SNT-TC-1A (NDT personnel qualification schemes); Client NDT procedures and acceptance criteria. On completion you receive: NDT report for each method used (MT, PT, UT, VT) stating technique, equipment and results; Indication sketches and photographs with location, length and orientation; Accept or reject statement against the specified criteria.
Which NDT method do I need for a crane hook or shackle?＋
For most steel hooks, shackles and pins, magnetic particle testing is the usual first choice because it finds surface and near-surface cracks quickly on the part itself. Dye penetrant is used where the material is non-magnetic, and ultrasonic testing where the concern is an internal flaw or lost thickness. Hook throat opening and wear are measured separately during the lifting-equipment inspection. The final method follows your client's procedure.
Do you provide NDT testing in Dammam and NDT inspection in Jubail?＋
Yes. We are based in Dammam and mobilise to Jubail Industrial City, Ras Tanura and other Eastern Province hubs, working on site or in your workshop. Before we arrive we agree surface condition, access, power and lighting, and any hot-work, confined-space or gate-pass requirements.