📍 Yanbu, Madinah Province
Rigger Level 1 Training & Certification in Yanbu
A Rigger Level 1 course for slingers, banksmen and new riggers on Saudi industrial and project sites. It teaches how to choose slings and rigging hardware, rig loads with the right hitches, give standard hand signals and inspect lifting gear before use. Level definitions vary by client scheme, so we align the content and assessment to your project's requirement. Yanbu Industrial City is a major petrochemical and refining centre on the Red Sea.
Rigger Level 1 Training in Yanbu: local context
Large construction and maintenance campaigns at Yanbu Industrial City and busy cargo operations at Yanbu Commercial Port typically draw contractor crews that are mobilised quickly, and some operators and riggers may be unfamiliar with the site and its equipment. Supervised practical assessment on the machine type each person will actually use is the most reliable check of competence. EES delivers crane, forklift and rigging training on site in Yanbu, in English or Arabic, and issues competency cards to those who pass.
What we deliver in Yanbu
- ✓Basic lifting terms: working load limit, mass of the load, centre of gravity and how sling angle increases the force in each leg
- ✓Sling types and selection: wire rope, chain, synthetic web and round slings, matched to the load, the environment and the hitch
- ✓Hitches: straight, choker and basket hitches and multi-leg slings, and how each changes rated capacity
- ✓Rigging hardware: shackles, eyebolts, hooks, hoist rings and turnbuckles, used as marked and with correct pin and thread engagement
- ✓Pre-use inspection of slings and hardware for damage, kinks, heat, wear and missing tags, with criteria for withdrawal from service
- ✓Signalling and communication: standard crane hand signals, radio calls and the banksman role
- ✓Safe slinging practice with tag lines, safe positions, no-go zones, landing and securing loads, then a written test and a practical rigging assessment
Standards
- ✓ASME B30.9 (slings)
- ✓ASME B30.26 (rigging hardware)
- ✓ASME B30 series standard hand signals
- ✓OSHA 29 CFR 1926 Subpart CC (rigger and signal person requirements)
Documentation
- ✓Course certificate with a unique number that can be checked through our certificate verification page
- ✓Competency card stating the rigger level and the scheme the course was aligned to
- ✓Written test and practical rigging assessment records
- ✓Attendance register and trainer assessment sheet showing the slings, hitches and signals assessed
Who we support in Yanbu
Local focus areas: Yanbu Industrial City, Yanbu Commercial Port.
Vision 2030 Mega-Projects
Equipment certification and operator training for NEOM, Qiddiya, Red Sea Global, Diriyah and other giga-projects.
Learn more →Oil, Gas & Petrochemical
Aramco-aligned equipment testing, H2S and confined-space training for upstream and downstream.
Learn more →Ports, Logistics & Warehousing
Port, shipyard and warehouse lifting equipment, forklift and crane testing, plus forklift operator training.
Learn more →Power & Utilities
Equipment certification and safety training for power plants, grids and water utilities.
Learn more →Also available in Yanbu
Rigger Level 2 Training & Certification
Rigger Level 2 course for experienced riggers: load weight and centre of gravity, rigging plans, multi-leg and tandem lift principles and gear inspection.
Learn more →Rigger Level 3 Training & Certification
Rigger Level 3 course for rigging and lifting supervisors: lift planning, risk assessment, supervision and critical lifts on Saudi industrial and project sites.
Learn more →Forklift Operator Training & Certification
Classroom and practical forklift operator course with a written test, driving assessment and competency card for warehouses, ports and plants in KSA.
Learn more →Mobile Crane Operator Training & Certification
Mobile crane operator course covering load charts, outrigger set-up, signals, LMI, daily checks and a practical lift test for Saudi sites.
Learn more →Excavator Operator Training & Certification
Excavator operator course on safe digging, trench hazards, underground services and machine checks, with practical assessment and a competency card.
Learn more →Telehandler Operator Training & Certification
Telehandler operator course on load charts, attachments, stability and safe load handling, with practical assessment and a competency card for KSA sites.
Learn more →Also serving: Rigger Level 1 Training in Jeddah, Rigger Level 1 Training in Tabuk, Rigger Level 1 Training in NEOM, Rigger Level 1 Training in Riyadh
FAQs
Do you provide Rigger Level 1 Training in Yanbu?＋
Yes. EES provides Rigger Level 1 Training at client sites in Yanbu, including Yanbu Industrial City and Yanbu Commercial Port. Contact us with your requirement and we will confirm scope and scheduling.
Which standards and documents apply to Rigger Level 1 Training in Yanbu?＋
Work in Yanbu is aligned with the following standards and references: ASME B30.9 (slings); ASME B30.26 (rigging hardware); ASME B30 series standard hand signals; OSHA 29 CFR 1926 Subpart CC (rigger and signal person requirements). On completion you receive: Course certificate with a unique number that can be checked through our certificate verification page; Competency card stating the rigger level and the scheme the course was aligned to; Written test and practical rigging assessment records.
What is Rigger Level 1, and how does it differ from Level 2 and Level 3?＋
Definitions vary by client scheme. Commonly Level 1 is the basic rigger or slinger, Level 2 is an advanced rigger who plans rigging and lifts, and Level 3 is a rigging or lifting supervisor. We align the course to the level your project specifies.
Will my client accept a Rigger Level 1 certificate in Saudi Arabia?＋
Acceptance depends on the client and the project scheme, and some clients require training that meets TVTC or client-specific requirements. Send us the requirement and ask for the current approval status and reference of the course before you book.