📍 Ras Tanura, Eastern Province
Rigging and Lifting Gear Inspection in Ras Tanura
Slings, shackles and hoists sit between the crane and the load, and wear, corrosion, deformation and overload damage are easy to miss by eye. Gear with no marking or no current certificate can also stop a lift at the gate. EES examines each item, rejects what fails the criteria, and returns the rest with certificates, tags and a register. Site of one of the world's largest oil refineries and export terminals, with continuous maintenance and turnaround activity.
Rigging & Loose Gear Inspection in Ras Tanura: local context
Contractors mobilising equipment to Ras Tanura Refinery and Ras Tanura Terminal generally need cranes, forklifts and rigging verified before the equipment reaches a controlled-access site, because entry procedures often ask for valid inspection records. EES carries out third-party inspection in the contractor's yard or on site and issues reports and inspection tags that fit pre-mobilisation paperwork.
What we deliver in Ras Tanura
- ✓Wire rope slings: broken wires per rope lay, corrosion, kinks, crushing, ferrule and thimble condition and rope diameter, assessed against ASME B30.9 and the manufacturer's data, with ISO 4309 as the reference for rope damage and discard
- ✓Chain slings: link wear, stretch, gouging, bent or twisted links, master link and fittings, and chain grade and WLL marking
- ✓Webbing and round slings: cuts, abrasion, chemical and UV damage, heat glazing, stitching, exposed core yarns on round slings and label legibility
- ✓Shackles, hooks, eyebolts, swivels and master links: wear, deformation, throat opening, thread and pin condition, latch function and WLL marking
- ✓Chain blocks, lever hoists and trolleys: load chain, hooks, housing, brake and ratchet function, with a no-load function check and a proof load test at the load the standard or manufacturer specifies
- ✓Lifting beams and spreader beams: welds, pad-eyes, bends and distortion, with proof load test and magnetic particle examination of critical welds where the scheme calls for it
- ✓Colour-coding, identification and registers, with rejected gear tagged and segregated and, with your agreement, cut or marked so it cannot return to service
Standards
- ✓ASME B30.9 (slings), B30.10 (hooks) and B30.26 (rigging hardware)
- ✓ASME B30.16 (overhead hoists), B30.21 (lever hoists) and B30.20 (below-the-hook lifting devices)
- ✓ISO 4309 (cranes - wire ropes - care and maintenance, inspection and discard)
- ✓Manufacturer specifications and the client's colour-coding scheme
Documentation
- ✓Certificate of thorough examination or test certificate per item or batch, with unique ID and WLL / SWL
- ✓Colour-coded tag or marking for the current inspection period, to the client's scheme
- ✓Rejection and quarantine report listing each failed item and the defect found
- ✓Lifting gear register, cross-referenced to item IDs, for your store and your client's audit
Read the full Rigging & Loose Gear Inspection service overview →
Who we support in Ras Tanura
Local focus areas: Ras Tanura Refinery, Ras Tanura Terminal.
Also available in Ras Tanura
Heavy Equipment Testing & Inspection
Third-party inspection and load testing for cranes, excavators, bulldozers and forklifts.
Learn more →Lifting Equipment Inspection & Load Testing
Third-party load testing of cranes, hoists, slings, shackles and lifting accessories.
Learn more →Crane Inspection & Certification
Mobile, tower, overhead and crawler crane inspection with certificates.
Learn more →Third-Party Certifications
Independent inspection reports, Certificates of Conformity and competency cards.
Learn more →Third-Party Inspection (TPI) for Aramco Projects
Independent inspection of cranes, lifting gear and heavy equipment before mobilisation to Aramco sites, prepared for Saudi Aramco GI and client requirements.
Learn more →MEWP, Boom Lift and Manbasket Inspection
Inspection and function testing of boom lifts, scissor lifts, swing stages and crane manbaskets, with report, certificate and tag for Saudi sites.
Learn more →Also serving: Rigging & Loose Gear Inspection in Dammam, Rigging & Loose Gear Inspection in Dhahran, Rigging & Loose Gear Inspection in Al Khobar, Rigging & Loose Gear Inspection in Jubail
FAQs
Do you provide Rigging & Loose Gear Inspection in Ras Tanura?＋
Yes. EES provides Rigging & Loose Gear Inspection at client sites in Ras Tanura, including Ras Tanura Refinery and Ras Tanura Terminal. Contact us with your requirement and we will confirm scope and scheduling.
Which standards and documents apply to Rigging & Loose Gear Inspection in Ras Tanura?＋
Work in Ras Tanura is aligned with the following standards and references: ASME B30.9 (slings), B30.10 (hooks) and B30.26 (rigging hardware); ASME B30.16 (overhead hoists), B30.21 (lever hoists) and B30.20 (below-the-hook lifting devices); ISO 4309 (cranes - wire ropes - care and maintenance, inspection and discard); Manufacturer specifications and the client's colour-coding scheme. On completion you receive: Certificate of thorough examination or test certificate per item or batch, with unique ID and WLL / SWL; Colour-coded tag or marking for the current inspection period, to the client's scheme; Rejection and quarantine report listing each failed item and the defect found.
How often must slings and shackles be inspected in Saudi Arabia?＋
Users check gear before every use, and a competent person examines it periodically. Six-monthly is a common interval for lifting gear on industrial and project sites, but your client's scheme, the manufacturer and the severity of service set the actual period, and we confirm it before we start.
What is lifting gear colour-coding and which colour do I need?＋
Colour-coding is a tag or band showing that an item was examined in a given period, so crews can see at a glance that gear is current. The colour for each period and the tag format follow the client's or site's scheme, which we confirm before inspection.