📍 NEOM, Tabuk Province
Lever Hoist Inspection & Certification in NEOM
A lever hoist lifts, pulls and tensions loads by working a ratchet lever that drives a load chain through a pawl mechanism and friction brake. Because it works at any angle and in tight spaces, it is used for pipe alignment, equipment skidding, machinery installation and tensioning during plant shutdowns in refineries, power plants and construction sites across Saudi Arabia. Cheater bars, side loading and shock loads are common on site, which is why regular examination and testing of the ratchet, brake and chain matters. The giga-project in north-west Saudi Arabia, mobilising vast fleets of heavy equipment and workers.
Lever Hoist inspection in NEOM: local context
Beyond the big cranes, a sprawling site like NEOM relies on chain blocks, lever hoists, winches, jacks and vacuum lifters in plant rooms, workshops, maintenance bays and service corridors, where they are easily overlooked. EES inspects and proof-tests these smaller lifting tools in batches, so equipment from several contractors can be checked in one visit with consistent tags and records.
Lever Hoist inspection scope in NEOM
- ✓Operating lever and handle for bending or distortion, and signs that an extension pipe or cheater bar has been used
- ✓Ratchet pawl and ratchet gear teeth for chipping, rounding and a positive, spring-loaded engagement
- ✓Friction brake discs or pads for wear and contamination from oil or grease
- ✓Free-wheel (chain disengage) selector for smooth operation and positive locking in the engaged position
- ✓Load chain for stretch, nicks, corrosion and twisted links, and the chain end stop on the dead end
- ✓Hooks and safety latches for throat opening, wear, cracks and latch function
- ✓Frame and cover plates for cracks and distortion, particularly where the hoist has been side-loaded or used pulling at an angle
- ✓Load holding when lifting and when pulling, with no slip when the lever direction is changed
Defects commonly found
- ✓Lever or handle bent from overload or cheater bar use
- ✓Worn ratchet pawl or gear teeth causing the mechanism to skip
- ✓Brake linings contaminated with oil or worn thin so the load slips
- ✓Free-wheel selector failing to lock, allowing unexpected chain run-out
- ✓Chain stop missing or hooks opened out and latches broken off
Standards
- ✓ASME B30.21 (Manually Lever-Operated Hoists)
- ✓ASME HST-3 (Manually Lever Operated Chain Hoists)
- ✓Manufacturer specifications and load charts
- ✓Saudi Aramco General Instructions (GI), where applicable
Testing
A proof load test is typically carried out at 100%-125% of rated capacity depending on the standard and client, in both lifting and pulling directions, with the brake holding checked on each direction change.
Frequency
Typically a thorough examination at least annually with a check before each use, and more frequent re-inspection for tools issued from a shared store during shutdowns where client or site rules require.
Who we support in NEOM
Local focus areas: The Line, Oxagon and Sindalah.
FAQs
Can you inspect a lever hoist on site in NEOM?＋
Yes. Our inspectors travel to your yard or project site in NEOM, including The Line, Oxagon and Sindalah, so the equipment does not need to be moved.
Which industries in NEOM request lever hoist inspection?＋
Typically operators and contractors in the Tabuk Province from these sectors: Vision 2030 Mega-Projects; Ports, Logistics & Warehousing; Power & Utilities.
Can a lever hoist be used to lift or support people?＋
No. Manufacturers state that lever hoists must not be used to lift or support persons. Use equipment designed and rated for personnel lifting, and plan the work under your site permit system.
Is a lever hoist certified the same way as a chain block?＋
Both are examined as hoists, but a lever hoist has a ratchet pawl, a friction brake and a free-wheel mechanism that need their own checks. The certificate should reference the serial number and safe working load of the specific unit.